RPMW Round Solid Carbide Inserts Ring-Shaped Using For Die-Sinking Cutters
YBG202 :A thin PVD coated TiCN layer on a tough substrate, for milling, parting and grooving on stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions.
RPMW:Milling inserts with a 16 mm cutting edge length and positive rake angle for general use.
Describtion:
** The milling cutter of a round carbide inserts means a continuous change of main Angle from 0 to 90 degrees, which is mainly determined by the cutting depth.
** This blade has a very high cutting edge strength. Since the chip generated along the direction of the long cutting edge is relatively thin, it is suitable for large feed quantity.
* (The direction of the radial cutting force along the blade is changing constantly, and the pressure generated during the machining process will depend on the cutting depth.
** The development of geometric groove shape of modern blade makes circular blade have stable cutting effect, low power demand and good stability.
** It is no longer an effective rough milling cutter, face milling and vertical milling in a wide range of applications.
Application:
Die milling cutter is used to process die cavity or die forming surface.Die milling cutter is evolved from end milling cutter, according to the working part shape can be divided into cone flat head, cylindrical ball head, cone ball head three kinds.
Round cemented carbide inserts has the following advantages:
(1) the circular/round inserts with cutting edge strength has no sharp Angle, and can withstand greater tool deflection and vibration, allowing higher rotation speed and feed increase during machining and reducing the risk of collapsing blade.
(2) the number of cutting edges has more available cutting edges, with 4 to 8 effective transpositions.It can save tool changing time, improve machining efficiency, and thus improve its economy.
(3) high cutting rate under the condition of not requiring high machine power, the circular blade can have high metal cutting rate, and because of the high strength of the blade, the feed rate can be higher than that of the right-angle milling cutter.
(4) high roughing precision. The surface of the workpiece after rough machining with circular blade is relatively flat, which can be easily semi-finished. In some cases, it can even be directly finished.
Specification:
Product Tags:
|
|
RPMW Round Solid Carbide Inserts Ring - Shaped Using For Die Sinking Cutters Images
|
